Shipping and receiving coordinator

KEVIN GEORGE TORKELSON

2425 DEL MAR WAY UNIT 103, CORONA, CA 92882

Email: kgtorkelson@gmail.com

Cell: 714-333-7062

I believe that “Team Work" is the key to success.
I have always been held in high regard with all the companies that I’ve worked for.

Work Experience

FACILITIES TECHNICIAN (CONTRACT)

TELELINKS LLC, Santa Ana, CA

June 2013 to Present

 

Maintained Electrical, 277, 120,220 VAC, and the companies UPS systems, Installed new kitchen and bathroom pipes drains and fixtures. I took care of general building problems that may arise.

 

FACILITIES MAINTENANCE TECHNICIAN (CONTRACT POSITION)

MEGGITT CONTROL SYSTEMS, Corona, CA

April 2013 to June 2013

Maintained Electrical, Plumbing.  I repaired industrial furnaces, compressors, overhead lighting, ovens and test chambers. I repaired facility network problems.

 

FACILITIES TECHNICIAN (CONTRACT)

TELELINKS LLC, Santa Ana, CA

June 2012 to April 2013

 

Maintain Electrical, 120, 220, 480, and 600 VAC, and the companies UPS systems, Installed new kitchen and bathroom pipes drains and fixtures. Took care of general building problems that may arise.

 

FACILITIES COORDINATOR/ SHIPPING AND RECEIVING MANAGER

INTERTEK U.S.A., Inc. Lake Forest, CA

October 2005 to June 2012

Installed 120VAC, 220VAC, 227VAC, single and dual phase circuits, plus 480VAC and 600VAC 3 phase circuits throughout facility, installed new conduit piping and pulled cable to given locations throughout the facility. Installed and tested single phase and three motors.

Repaired stepper motors. Repaired remote control gate openers (i.e. Elite ).

Built and installed showers and kitchens with the company’s labs for testing. Installed Spas into environmental chambers for testing, and I filled with water and connected up the power (normally 220vac), I then ran diagnostics. I connected test equipment and ran tests for up to 72 hours. The results were recorded on a chart recorder, other equipment recorded the test results via External USB drives, I examined the test results when the test was completed. I got back with the clients on the results.

My job entailed buying parts for testing from a list of vendors; I would go with the best price.

When the jobs come in I would notify the Project Coordinator about the order, so that it could be scheduled.

Repaired DC Power supplies down to the component level, tested magnetic relays and switches
Tested circuit boards, replaced components if necessary.
Forklift certified
Test fixture design and fabrication. I am familiar with all hand tools, and machinery. I did a lot of design work in metal and wood. Repaired environmental test chambers Maintained and replaced ballasts and lighting fixtures. Repaired and replaced plumbing fixtures throughout the facility.
 

ELECTRONICS TECHNICIAN SENIOR

OPTIMAL ROBOTICS, Santa Ana, CA

 

September 2002 to October 2005

 

I repaired scanners, LCD monitors, and coin/bill changers down to the component level.
Trained newly hired technicians.

QUALITY CONTROL ENGINEERING TECHNICIAN

SONIX IV, Huntington Beach, CA

 

January 2002 to September 2002

 

Updated products and tested products to make them more efficient and reliable. During my short stay with I improve the product from 35% efficiency to 90%.

SYSTEMS SUPPORT ENGINEER SENIOR

RAYTHEON TECHNICAL SERVICES COMPANY, LLC, Fullerton, CA

 

November 1978 to December 2001

 

Field Service, Maintained Command and Control Equipment world-wide
Installation of equipment sold to foreign nations
My job was to go in install the required equipment within a given time frame.

Education:

Certificate, Computer Science

Cypress College, Cypress, CA

1981 to 1982

2 years Accreted, Electronics

Fullerton College, Fullerton, CA

1968 to 1970

Diploma, General Studies

Garden Grove HS, Garden Grove, CA

1964 to 1968

Additional Information

Skills:


Cable/Electronics (2 years)
Can Operate all power tools
I am able work with all tools including power equipment (7 years)
I am extremely knowledgeable of most electrical and electronic circuits. (7 years)
I am familiar with most software applications (7 years)
I have written test procedures (7 years)
Worked in the company machine shop, using mills, lathes, brakes and etc
Worked with machinery and many other tools
Forklift operation and repair.

  • ID#: 79715
  • Location: Corona, CA , 92882

Don't Be Fooled

  • When selling, do not put your home address in your ad.
  • To avoid scams, buy and sell with people you can meet locally, in person.
  • When meeting with someone you don't know, meet in a public place. If that's not possible, have a buddy with you. Also, carry a cell phone; if you feel unsafe, you can call a trusted friend, and stay on the line.
  • Never give out financial or private information like account numbers, PayPal login, or social security number.
  • If an offer sounds too good to be true, it is. Walk away!

Look Who's Hiring!

Shipping and Receiving Coordinator
Livermore, CA The Wine Group
Shipping and Receiving
San Pedro, CA Randstad
Part-Time Seasonal Shipping and Receiving Asso...
South San Francisco, CA Amazon
Shipping and Receiving Associate - Berendsen F...
San Diego, CA Berendsen Fluid Power
Shipping and Receiving
Milpitas, CA Randstad
Shipping and Receiving
Fremont, CA Randstad