Drill Press Operator
We have an immediate opening for an experienced drill press operator for an engineering firm in Corona. The position is temp to perm and the salary is $12 to $13 depending on experience.
Position Title:
Manufacturing Operator IWC Classification:
Non-Exempt Reports to:
Manufacturing Supervisor Supervises:
N/A
Summary:
Under general supervision, JOB DUTIES:
Include but are not limited to the following:
o Operates previously set up drilling machines, such as single- or multiple-spindle drill presses to drill, ream, countersink, spot face, or tap holes in metal or nonmetal work pieces according to specifications:
Lifts work piece manually or with hoist, and positions and secures it on machine table in drilling jig or holding fixture. o 2) Moves machine controls to feed tools into work piece, and engages automatic feed. o 3) Observes machine operation, and verifies conformance of drilled work piece to specifications, using fixed gauges, calipers, and micrometers. o 4) Changes worn cutting tools, using wrenches. o 5) Moves controls to adjust cutting speeds, feed rates, and depth of cut. o 6) May assist MACHINE SETTER in setting up machine. o 7) May sharpen cutting tools, using bench grinder. o 8) May perform minor assembly, such as fastening parts with nuts, bolts, and screws, using power tools and hand tools. o Lifting, pulling, and or pushing up to 50lbs o Read prints and follow work instructions o Standing for long periods of timeEstimated Salary: $20 to $28 per hour based on qualifications.
Position Title:
Manufacturing Operator IWC Classification:
Non-Exempt Reports to:
Manufacturing Supervisor Supervises:
N/A
Summary:
Under general supervision, JOB DUTIES:
Include but are not limited to the following:
o Operates previously set up drilling machines, such as single- or multiple-spindle drill presses to drill, ream, countersink, spot face, or tap holes in metal or nonmetal work pieces according to specifications:
Lifts work piece manually or with hoist, and positions and secures it on machine table in drilling jig or holding fixture. o 2) Moves machine controls to feed tools into work piece, and engages automatic feed. o 3) Observes machine operation, and verifies conformance of drilled work piece to specifications, using fixed gauges, calipers, and micrometers. o 4) Changes worn cutting tools, using wrenches. o 5) Moves controls to adjust cutting speeds, feed rates, and depth of cut. o 6) May assist MACHINE SETTER in setting up machine. o 7) May sharpen cutting tools, using bench grinder. o 8) May perform minor assembly, such as fastening parts with nuts, bolts, and screws, using power tools and hand tools. o Lifting, pulling, and or pushing up to 50lbs o Read prints and follow work instructions o Standing for long periods of timeEstimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
